Pass Engineers
Washermanpet, Chennai, Tamil Nadu
GST No. 33ABHPS2281F1ZQ
TrustSEAL Verified
Call 08048763685
66% Response Rate
SEND EMAIL
Product Details:
| Voltage (V) | 380-440V |
| Weight (kg) | 4200 kg |
| Brand Name/ Model No. | Pass |
| Power Source | Electrical |
| Frequency | 50/60Hz |
| Dust Removal Efficiency (%) | 99.95% |
| Country of Origin | Made in India |
Product Details:
| Airflow (m3/h or CFM) | 475 to 3200 m3/h |
| Power (Hp / kW ) | 0.5 hp to 2.0 hp |
| Power Source | Electrical |
| Voltage | 215 V to 420 V |
| Max Vacuum | 200 to 400 mm of WG |
| Country of Origin | Made in India |
Owing to our rich industrial experience, we are offering Portable Dust Collector.
Features:
Application areas:
Additional Information:
Product Details:
| Airflow (m3/h or CFM) | 1500 - 1,250,000 m3/h |
| Filter Surface Area (m2) | 24~17238 m2 |
| Country of Origin | Made in India |
| Filter Speed | 0.8~1.2 m/s |
| Air Inelt Concentration | Less than 200 g/Nm3 |
| Size | 040-125 |
| Cyclone casing | 2 |
| Central pipe | 2 |
Specifications:
| Size | Cyclone casing | Central pipe | Cyclone casing | Central pipe |
| 040-125 | 2 | 2 | 4 | 2 |
| 140-180 | 2.5 | 2.5 | 5 | 2.5 |
Additional Information:
Product Details:
| Brand | Pass |
| Material | Stainless Steel |
| Power Source | Electrical |
| Voltage | 280-440V |
| Filtration efficiency | 99.9% |
| Minimum Particle Size | 30mg/Nm3 |
Product Details:
| Airflow | 5000 - 120200 m3/hour |
| Material | SS |
| Usage/Application | Dust Collector |
| Brand Name/ Model No. | Pass |
| Power Source | Electric |
| Dust Removal Efficiency (%) | 99% |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Airflow (m3/hour or CFM) | 1100-3600 m3/h |
| Voltage (V) | 380-440V |
| Usage/Application | Dust Collector |
| Brand Name/ Model No. | Pass |
| Power Source | Electric |
| Dust Removal Efficiency (%) | 99.99% |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | Stainless Steel |
| Usage/Application | Dust Collector |
| Power Source | Electrical |
| Voltage | 280-440V |
| Brand | Pass |
| Frequency | 50/60Hz |
Product Details:
| Airflow (m3/hour or CFM) | 7550 - 15100 m3/hour |
| Power | 10 hp |
| Voltage (V) | 415 V |
| Weight (kg) | 1500 kg |
| Power Source | Electric |
| Dust Removal Efficiency (%) | 99.9% |
| Country of Origin | Made in India |
Specification:
| Size | a | b | x | d | e | f | g | p | q | r | s | k | i | n |
| 8 | 126 | 96 | 177 | 102 | 147 | 147 | 9.5 | 16.5 | 30 | 16.5 | 30 | 16.5 | 30 | 8 |
| 13 | 151 | 116 | 227 | 127 | 187 | 187 | 9.5 | 16.5 | 30 | 16.5 | 30 | 16.5 | 30 | 8 |
| 16 | 201 | 151 | 177 | 197 | 147 | 287 | 11.5 | 13.5 | 25 | 16.5 | 30 | 16.5 | 30 | 10 |
| 26 | 201 | 151 | 227 | 247 | 187 | 367 | 11.5 | 13.5 | 25 | 16.5 | 30 | 16.5 | 30 | 10 |
Product Details:
| Airflow (m3/hour or CFM) | 7550~15100 m3/h |
| Voltage (V) | 415 V |
| Usage | Industrial |
| Material | Carbon Steel |
| Brand Name/ Model No. | Pass |
| Power Source | Electric |
| Dust Removal Efficiency (%) | 99% |
| Fan Motor Power | 8.5 kw |
Product Details:
| Brand | Pass |
| Material | SS |
| Efficiency | 99.9% |
| Weight | 4000kg |
| Fan Power | 7.5kW |
| Voltage | 220-440V |
Product Details:
| Brand | Pass |
| Material | Stainless Steel |
| Power Source | Electrical |
| Voltage | 380-440 V |
| Frequency | 50/60 Hz |
| Country of Origin | Made in India |
Product Details:
| Airflow (m3/hour or CFM) | 575 to 3200 m3/hour |
| Usage | Industrial |
| Material | Carbon Steel |
| Usage/Application | Dust Collector |
| Brand Name/ Model No. | Pass |
| Power Source | Electric |
| Dust Removal Efficiency (%) | 98% |
| Fan Motor Power | 8.4 kw |
Product Details:
| Material | Carbon Steel |
| Power Source | Electric |
| Efficiency | 98% |
| Filtration Air | 4320 m3/n |
| Resistance | 150 (H20mm) |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Airflow (m3/h or CFM) | 540~10800 m3/h |
| Brand Name/ Model No. | Pass |
| Power Source | Electrical |
| Voltage | 280-440 V |
| Country of Origin | Made in India |
Product Details:
| Material | Iron Steel |
| Usage/Application | Industrial |
| Power Source | Electrical |
| Air Flow Rates | 500 m3/hr |
| Filter Dust Level | Up to 1 microns |
Product Details:
| Power | 1.3 -4 hp |
| Airflow (m3/hour or CFM) | 1200-3600 m3/h |
| Voltage (V) | 380-440V |
| Dust Removal Efficiency (%) | 99.9% |
| Country of Origin | Made in India |
Specifications:
| Paua | Capacity m3/hour | Motor | Dimensions (mm) | Outlet Size | Inlet Size | Wieght (Kg) | ||||||||||
| Size | KW | RPM | A | B | C | D | E | F | G | H | ARR 1 | ARR 2 | ARR 1 | ARR 2 | ||
| 8 | 800 | 1.5 | 2850 | 1235 | 1476 | 1470 | 1785 | 260 | 570 | 310 | 714 | 126 x 96 | 147 x 147 | 175 x 100 | 135 | 95 |
| 13 | 1300 | 2.2 | 2850 | 1405 | 1691 | 1675 | 2062 | 320 | 640 | 705 | 800 | 151 x 116 | 187 x 187 | 225 x 125 | 170 | 110 |
| 16 | 1600 | 3.7 | 2850 | 1235 | 1396 | 1588 | 2000 | 260 | 580 | 665 | 715 | 201 x 151 | 287 x 147 | 195 x 175 | 205 | 160 |
| 26 | 2600 | 3.7 | 2850 | 1405 | 1611 | 1823 | 2225 | 320 | 580 | 665 | 800 | 201 x 151 | 367 x 187 | 245 x 225 | 250 | 170 |
Product Details:
| Airflow (m3/h or CFM) | 5000 - 120200 m3/h |
| Cloth Area (sq. ft.) | 96 - 1728 m2 |
| Country of Origin | Made in India |
| Filter Rate | 1.0 - 1.2 mL/min |
| Compressed Air | 0.5 - 0.7 MPa |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | Stainless Steel |
| Usage/Application | Dust Collection |
| Voltage | 280-440V |
| Filtration efficiency | 99.9% |
| Air Volume | 28800-201600 (m3/h) |
Model | Power KW/HP | Suction capacity | Air Flow | Collection Capacity | Suction portSize | Duty
| Noise Level | Machine Dimension L*B*H |
AMDC-C10 | 0.75/1.0 | 100 | 900 | 30 | 100 | S1 | 65 | 500*600*1200 |
AMDC-C20 | 1.5/2.0 | 125 | 1400 | 30 | 150 | S1 | 68 | 60*600*1200 |
AMDC-C30 | 2.2/3.0 | 150 | 2800 | 40 | 150 | S1 | 72 | 600*650*1400 |
AMDC-C50 | 3.5/5.0 | 200 | 3500 | 50 | 150 | S1 | 72 | 650*650*1500 |
AMDC-C75 | 5.5/7.5 | 200 | 4200 | 60 | 200 | S1 | 78 | 850*850*1800 |
AMDC-C100 | 7.5/10 | 250 | 5000 | 60 | 250 | S1 | 80 | 850*850*2100 |
Product Details:
| Airflow (m3/h or CFM) | 475 - 3200 m3/hour |
| Voltage (V) | 415 V |
| Brand Name/ Model No. | Pass |
| Material | Carbon Steel |
| Country of Origin | Made in India |
| Fan Motor | 8 kw |
| Power Source | Electric |
Product Details:
| Airflow (m3/h or CFM) | 1500 - 1,250,000 m3/h |
| Filter Surface Area (m2) | 24~17238 m2 |
| Country of Origin | Made in India |
| Filter Speed | 0.8~1.2 m/s |
| Air Inelt Concentration | Less than 200 g/Nm3 |
| Size | 140-180 |
| Cyclone casing | 2.5 |
| Central pipe | 2.5 |
Specifications:
| Size | Cyclone casing | Central pipe | Cyclone casing | Central pipe |
| 040-125 | 2 | 2 | 4 | 2 |
| 140-180 | 2.5 | 2.5 | 5 | 2.5 |
Product Details:
| Material | Carbon Steel |
| Filtration efficiency | 99.9% |
| Application | Dust Collect |
| Motor Power | 25kW |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Material | Mild Steel |
| Usage/Application | Industrial |
| Rated Voltage | 115/230 V |
| Usage | Dust collector |
Product Details:
| Usage/Application | Dust Collector |
| Filtration efficiency | 99.9% |
| Weight | 2-70t |
| Minimum Particle Size | 0.5 micron |
Product Details:
| Airflow (m3/h or CFM) | 10000 CFM |
| Power (Hp / kW ) | 30 kW |
| Brand | Pass |
| Top Filter Bag Size | dia.147 x 3660 mm long |
| Material | Mild Steel |
| Sound Rating | 85 db |
| Voltage | 440V |
| Filtration efficiency | 99.9% |
We have emerged as a prominent manufacturer of Dust Collectors.
Features:
Specifications:
|
Model |
Power KW/HP |
Suction capacity |
Air Flow |
Collection Capacity |
Suction port Size |
Duty
|
Noise Level |
Machine Dimension L*B*H |
|
AMDC-C10 |
0.75/1.0 |
100 |
900 |
30 |
100 |
S1 |
65 |
500*600*1200 |
|
AMDC-C20 |
1.5/2.0 |
125 |
1400 |
30 |
150 |
S1 |
68 |
60*600*1200 |
|
AMDC-C30 |
2.2/3.0 |
150 |
2800 |
40 |
150 |
S1 |
72 |
600*650*1400 |
|
AMDC-C50 |
3.5/5.0 |
200 |
3500 |
50 |
150 |
S1 |
72 |
650*650*1500 |
|
AMDC-C75 |
5.5/7.5 |
200 |
4200 |
60 |
200 |
S1 |
78 |
850*850*1800 |
|
AMDC-C100 |
7.5/10 |
250 |
5000 |
60 |
250 |
S1 |
80 |
850*850*2100 |
Product Details:
| Brand | Pass |
| Material | Carbon Steel |
| Power Source | Electric |
| Air Flow | 475 to 3200 M3/Hr |
| Efficiency | 99.9% |
| Minimum Particle Size | 2.5 micron |
Product Details:
| Material | Stainless Steel |
| Power Source | Electrical |
| Voltage | 380-440V |
| Brand | Pass |
| Filtration efficiency | 99.99% |
| Power Kw | 12.5kW |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Airflow (m3/h or CFM) | 5000 - 120200 m3/ h |
| Power (Hp / kW ) | 8.5 kW |
| Brand | Pass |
| Material | Carbon Steel |
| Power Source | Electric |
| Voltage | 380-440V |
| Efficiency | 99.9% |
| Country of Origin | Made in India |
| Paua | Capacity m3/hour | Motor | Dimensions (mm) | Outlet Size | Inlet Size | Wieght (Kg) | ||||||||||
| Size | KW | RPM | A | B | C | D | E | F | G | H | ARR 1 | ARR 2 | ARR 1 | ARR 2 | ||
| 8 | 800 | 1.5 | 2850 | 1235 | 1476 | 1470 | 1785 | 260 | 570 | 310 | 714 | 126 x 96 | 147 x 147 | 175 x 100 | 135 | 95 |
| 13 | 1300 | 2.2 | 2850 | 1405 | 1691 | 1675 | 2062 | 320 | 640 | 705 | 800 | 151 x 116 | 187 x 187 | 225 x 125 | 170 | 110 |
| 16 | 1600 | 3.7 | 2850 | 1235 | 1396 | 1588 | 2000 | 260 | 580 | 665 | 715 | 201 x 151 | 287 x 147 | 195 x 175 | 205 | 160 |
| 26 | 2600 | 3.7 | 2850 | 1405 | 1611 | 1823 | 2225 | 320 | 580 | 665 | 800 | 201 x 151 | 367 x 187 | 245 x 225 | 250 | 170 |
Additional Information:
Product Details:
| Usage/Application | Dust Collector |
| Country of Origin | Made in India |
| Pressure | 5000 Pa (500 mm WG) |
| Flow Rate | 1.7 and 20 m3/s (6000-72000 m3/h) |
| Max Operating Temp | 100 degC |
Additional Information:
Product Details:
| Brand | Pass |
| Usage/Application | Industrial |
| Efficiency | 99% |
| Weight | 500-4000kg |
| Compressed Air Volume | 0.3 - 2.5 m3 |
Product Details:
| Weight | 4200kg |
| Air Volume | 5000 - 120200m3 / h |
| Minimum Particle Size | 1 micron |
| Filter Area In Sq M | 96 - 1728 m2 |
| Filter Rate | 1.0 - 1.2 m / min |
Product Details:
| Material | Iron,Steel |
| Dust Removal Efficiency (%) | 99.99 % |
| Dimension | 630*1075*1330 mm |
| Country of Origin | Made in India |
| Power | 1 hp |
The dust-laden gas is admitted through the bag filter inlet where
the coarsest particles are separated out and drop down into the
dust hopper. The gas flows through the distribution arrangement
and is directed onto the bags in a suitable manner. The gas is
drawn through the filter material and the fine dust is collected
on the outsides of the bags. Heavier particles fall directly into
the dust hopper. The clean gas flows through the insides of the
filter bags to the outlet.
The dust deposit on the outsides of the filter bags is removed by
means of compressed air which is admitted as short pulses in the
bags. The pressure pulse causes the filter material to stretch
quickly and then immediately resume its original shape. The dust
deposit thus falls off the surfaces of the bag and drops into the
dust hopper.
The bags are grouped in rows with one cleaning valve and one
nozzle pipe for each row. The cleaning valve is a diaphragm valve
which admits compressed air into the nozzle pipe during cleaning.
The compressed air is drawn from a receiver on the side of the
nozzle housing. The holes of the nozzle pipe are located above
the ends of the filter bags.
The control unit opens and closes the solenoid valves in
accordance with a programmed pattern. The dust deposit has a filtering action at the same time as it impedes the gas flow.
The dust collected in the dust hopper is discharged by means of a
feeder into a dust bin or onto a dust conveyor located below the
filter.
Product Details:
| Airflow (m3/h or CFM) | 475 to 3200 m3/h |
| Brand Name/ Model No. | Pass |
| Material | Carbon Steel |
| Automation Grade | Automatic |
| Dust Removal Efficiency (%) | 99.99% |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Minimum Particle Size | 2.5 micron |
Product Details:
| Material | Mild Steel |
| Filtration efficiency | 99% |
| Application | Dust Collector |
| Minimum Particle Size | 0.1 Micron |
Product Details:
| Filtration efficiency | 99.9% |
| Airflow | 6000 |
| Weight | 0.5-10 tons |
| Minimum Particle Size | 18~90 m2 |
Product Details:
| Efficiency | 99.95% |
| Weight | 4200kg |
| Air Volume | 5000 - 120200m3 / h |
| Compressed Air | 0.5 - 0.7 Mpa |