Product Details:
Power | 3-30kW |
Voltage | 220-480V |
Brand | Pass |
Pressure | 50~843 Pa |
Air quantity = 14,000 cum/hr
Impeller will be mounted on motor shaft
Material of construction:
Housing : Fabricated from m.s.sheets fitted with flanges
and strong wire guard. M.S.plate welded Inside
the housing for mounting motor
Stand : Fabricated from m.s.pipe with wheel for
tilting of axial fan
Impeller: Aluminium alloy casting having 6 fixed
blades. Dia.700 mm
Motor : 3 ph, 415 V, 50 Hz, AC, Foot mounted.
(Kirloskar/BBL/CGL/Any other reputed Make)Product Details:
Power | 25 hp |
Capacity | 30000 cum/hr |
Fan Speed | 1440 rpm |
Voltage | 400/440 V |
Pass | rpm | Motor Kw |
50 | 1380 | 0.37 |
60 | 1405 | 0.55 |
70 | 1410 | 1.5 |
80 | 925 | 0.75 |
80 | 1430 | 2.2 |
90 | 930 | 1.5 |
90 | 1445 | 5.5 |
100 | 935 | 2.2 |
120 | 710 | 2.2 |
120 | 960 | 5.5 |
125 | 720 | 3.7 |
125 | 960 | 7.5 |
140 | 715 | 5.5 |
140 | 970 | 15 |
160 | 720 | 11 |
180 | 725 | 30 |
Product Details:
Motor Power | 150 hp |
Usage/Application | Industrial |
Fan Speed | 3000 rpm |
Air Flow Rate/Volume Flow | 250000 m3/hr |
Brand | Pass |
Pass | rpm | Motor Kw |
50 | 1380 | 0.37 |
60 | 1405 | 0.55 |
70 | 1410 | 1.5 |
80 | 925 | 0.75 |
80 | 1430 | 2.2 |
90 | 930 | 1.5 |
90 | 1445 | 5.5 |
100 | 935 | 2.2 |
120 | 710 | 2.2 |
120 | 960 | 5.5 |
125 | 720 | 3.7 |
125 | 960 | 7.5 |
140 | 715 | 5.5 |
140 | 970 | 15 |
160 | 720 | 11 |
180 | 725 | 30 |
Product Details:
Motor Power | 100 hp |
Fan Speed | 1440 rpm |
Air Flow Rate/Volume Flow | 50000 cum/hr |
Frequency | 50/60Hz |
Pass | rpm | Motor kW |
50 | 1380 | 0.37 |
60 | 1405 | 0.55 |
70 | 1410 | 1.5 |
80 | 925 | 0.75 |
80 | 1430 | 2.2 |
90 | 930 | 1.5 |
90 | 1445 | 5.5 |
100 | 935 | 2.2 |
120 | 710 | 2.2 |
120 | 960 | 5.5 |
125 | 720 | 3.7 |
125 | 960 | 7.5 |
140 | 715 | 5.5 |
140 | 970 | 15 |
160 | 720 | 11 |
180 | 725 | 30 |
Product Details:
Minimum Order Quantity | 1 Unit |
Motor Power | 75 kW |
Fan Speed | Max. 3000 rpm |
Air Flow Rate/Volume Flow | 100000 cum/hr |
Voltage | 220V |
The static parts of the fan consist of the following:
1. Casing (single or In parts) with Inspection door and drain
plug and with sealing plate (for unsplit casing)
2. Inlet cone
3. Pedestal
The rotor of the fan consist of the following parts:
4. Impeller
5. Shaft fitted with bearing (with housing)
6. Flexible coupling with guard / ‘V’ belt drive with guard
7. Cooling disc with guard If required
Special Constructional Features:
In certain cases the fans may be supplied with certain specialities depending on the application. Some of the different specialities normally encountered are given below:
Static Parts
a. Casing material – different grades of stainless steel/rubber
lining/FRP lining
b. Gas tightness and sealing arrangements
c. Painting – epoxy paint/HRP/others
d. Scroll liner – If required
8
Rotor Parts
a. Impeller material – high tensile steel/different grades of
stainless steel and alloy steel / heat resistant steel /
others
b. Protection against wear – wearing strips/hard facing/others